Description
- The perfect low light hunting peep sight up to 200 yards.. Best out to 150 yards (not for long distance):
- Made for fast sight acquisition and cloverleaf groups. Use the scope -like reticle and the bright green fiber optics to get on target fast. Pair it with a TruGlo front sight for a three dot pistol setup (TruGlo sights not sold on our site)
- SCROLL DOWN:
- To read about all of the unique features of these peep sights
- FITS:
- Henry Large Caliber rifles chambered in 45-70 30-30, 360, 38-55
- FITS:
- Should work with your factory sight OR any replacement front sight (fiber optic or otherwise).
- SHOOTS HIGH:
- Henry rifles sometimes have issues with running out of rear sight elevation. Henry's come from the factory with tall front sights, usually .550" - .570" tall. Up to around .565" will, for the most part, work just fine.
In the Package: one sight base w/windage screw, one aperture spring w/ elevation screw, two mounting screws, one Allen wrench.
CLOVERLEAF RECEIVER PEEP SIGHTS KEY FEATURES:
- Sleek, low profile, snag-free winged base secures the aperture spring against damage and zero loss while presenting an elegant, dare we say sexy, profile.
- Low aperture sight height elevations (from .26" in the center of the sight up to .36")
- Clearly marked, scope-like windage and elevation marks make for quick and precise adjustment
- CloverLeaf aperture provides an exceptionally large, .165", bright target picture while still allowing for scope-like, precise shot placement with bright fiber optics on either side
- One piece aperture spring assembly offers robust, repeatable adjustment, and interchangeability between all bases/rails.
- Matte blasted top sighting channel greatly reduces reflective light interference.
- Type III anodized 7075 billet or lacquered brass bar stock bases look great for a lifetime.
SPECIFICATIONS:
WINDAGE: Side-to-side .09" (using set screw)
SIGHT HEIGHT (from receiver base to center of peep): .26" - .36" works with factory front sights (using set screw)
CLOVERLEAF SPRING: .165" ghost opening and 2.3" length tail (rides along the bottom of the base/rail)
SMALL BASES Pistol Calibers: 3.31" length x .650" width
LARGE BASES Big Bores: 3.66" length x .650" width
What Makes Our Peep Sights Different?
- Traditional receiver mounted rear peep sights are too tall, forcing you to go on a hunt for a suitable front sight when you'd rather be hunting.
- Delicate aperture stems are exposed to rough handling, come loose / unscrewed during use, and are prone to snagging.
- Elevation and windage adjustments use fiddly double set screws that often vibrate loose.
- Blued steel bases rust and lose their luster.
Warranty Information
